Interlink-electronics MicroModule PS2 Manual de usuario descargar pdf (Pagina 10)

www.interlinkelectronics.com

PS2 MicroModule

Integration Guide

6.0 Connection

Connection to MicroModule is accomplished via header J2 (Molex series #53261-0871), where

J2 provides the connection to the unit’s PS/2 interface (See Table 1 for header pin-out). The

integrator will need a cable with one female end (Molex series #51021) to mate to J2 and a

second end to mate to their desired interface (e.g., a PS/2 port, PCBA, etc.). Information on the

mating connector to MicroModule’s PCB header is given below for system integrators to

fabricate cables.

6.1 Molex Header/Mating Connector Specifications

The J2 header is a Molex series #53261-0871. Molex connector series #51021 is designed

to mate with this header. The metallic contacts that slip into the #51021 housing can be

either 50079-8 or 50058-8. The 50079 contacts accept wires AWG 26-28, and the 50058

contacts accept wires AWG 28-32.

Figure 7: MicroModule Connector (Molex Series 53261).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Interlink-electronics MicroModule PS2 Manual de usuario Pagina 10